BCLWX - AQUAPON FLOOR PATCH,97-180,COMP A

  • MSDS: BCLWX
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: AQUAPON FLOOR PATCH,97-180,COMP A
  • National Stock Number: 8010-00N006075
Product Identification

Product ID:AQUAPON FLOOR PATCH,97-180,COMP A
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006075
MSDS Number: BCLWX

Responsible Party
PPG INDUSTRIES,INC

Emergency Phone: 412-434-3131

Cage: GO796

Contractor
PPG INDUSTRIES,INC. COATINGS TRESINS DIV.
PITTSBURGH, PA 15272 US

Telephone: 304-843-1300

Cage: GO796

Ingredients

EPOXY RESIN

Fraction By Weight: 95%

ACGIH TLV: 50 PPM


LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: <.06%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:EYE/SKIN: IRRIT. VAPORS: ANESTHETIC,IRRIT OF
RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL ATTN. SKIN: WASH
WITH WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING,CONSULT
PHYSICIAN.

Fire Fighting

Flash Point:167F/75C (PMCC)
Lower Limits:1.2
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:SECURE SOURCES OF IGNITION,AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. DO NOT
TAKE INTERNALLY. GROUND CONTAINER WHEN POURING,AVOID FREE FALL OF
LIQUID IN EXCESS OF A FEW INCHES.
Other Precautions:DO NOT FLAME CUT,BRAZE OR WELD WITHOUT NIOSH/MSHA
APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:REQUIRED
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT
Supplemental Safety and Health
PART A OF A TWO PART KIT. PART B ID CODE: 97-181.

Chemical Properties

Boiling Pt:B.P. Text:243F/117C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:0.1

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CARBON MONOXIDE

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.